https://elecinnov.co/storage/StorageBoxes/Box022 BMS - Battery Management System. Ruby.EDMS 21/02/2023 ![[IMG_8241.jpeg]] Large Capacitor bank. 3 x 100uF 480Vac. Mounted to a wooden block with covers over the terminals. ![[IMG_8242.jpeg]] Medium sized Capacitor bank. ![[IMG_8243.jpeg]] 3 Phase Choke mounted on a wooden block ![[IMG_8244.jpeg]] Trigger button. Used for operators to signal to the EDM data logger that a fault had occured (causing the data to be stored). ![[IMG_8245.jpeg]] K Type Thermocouple Amplifier. 0 to 1370 degrees Celsius = 4 to 20mA ![[IMG_8246.jpeg]] EI-387v1 Differential Amplifier ![[IMG_8247.jpeg]] Temperature Controller. Set Setting. Access the "Machine Status" menu by pressing and quickly releasing the "set" key. The label of the "SEt" folder appears. To display the Setpoint value press the "set" key again. The value appears on the display. To change the Setpoint value, use the "UP" and "DOWN" keys within 15 seconds. If the parameter is LOC = y the Setpoint cannot be changed. ![[IMG_8248.jpeg]] Transfomer Winding Components including cores and frames. Farnell:305-6387 - 4312-020-39930: CORE, Half ETD34 3C90 Farnell:305-6302 - CPH-ETD34-1S-14P: Bobbin, ETD34 1SEC Farnell:305-6302 - 4322-021-01640: Bobbin, ETD34 AC8-6A ![[IMG_8249.jpeg]]